Call Now!

(214) 331-2334

Sales@DallasSignsMfg.com

Dallas Sign Company

Turn-Key Sign Design, Sign Manufacturing, Sign Installation and Sign Service since 1979.

DallasSignsMfg.com

Now with Live Showroom Demonstrations

Products that Improve Your Signs

Come See Our

$450,000+ SIGN SHOWROOM!

Up | Literature | Contact Us

Pole Sign  Pole Sign  Pole Sign  Pole Sign  Pole Sign  Pole Sign

Protective Coatings for Pole Sign and Pylon Sign Faces


SolarGuard Plastic Protection for an Amazingly Longer Lasting Sign


Pole or pylon plastic sign faces that don’t fade or “yellow” for 5 years because of internal UV protection is a step in the right direction, but your sign needs to look nearly as good 25 years from now as it looks the day it is installed; or you need to plan to replace it often so that your potential customers do not get the wrong impression of your business.

The longevity and appearance of plastic face materials and graphics are extended when they are coated with SolarGuard™, a special, clear, high-gloss, mar-resistant topcoat which protects plastics from ultraviolet light and ozone so that they last longer, just like your eyeglasses have UV coatings to protect the plastic lens.

Dallas Signs Manufacturing is an authorized SolarGuard™ applicator.

You won’t have dull, dingy plastic faces on your sign if we manufactured it.

Dallas Signs Manufacturing adds SolarGuard™ protection to every plastic-faced sign.    

We began applying SolarGuard over 25 years ago.  We have NEVER replaced a sign face due to fading!                                             SOLARGUARD 7 YEAR TEST

Does SolarGuard™ Protection Work?  The face on the right was made of “generic” red acrylic and black trim-cap.  The left half was coated with SolarGuard™ and the face was left outside for ONLY 7 years; your sign will be out there much longer!

Protected vs. unprotected vinyl lettering.Picture of protected vs. unprotected vinyl lettering left outside for 7 years.

(This product does not come from the traditional sign industry.  Few sign companies know about it, or where to get it.)

    

Electronic Message Center faces that were NOT protected with SolarGuard™ (Click on each picture to enlarge.)

Lumabrite Optical Brighteners for a Better Looking Sign


Just as coated lenses in binoculars increase the light gathering ability of the lens, the special Lumabrite™ crystal clear coatings we use increase the brightness of our plastic-faced signs.

Also, Lumabrite™ reduces maintenance because of built-in self-cleaning properties.

As an added bonus Lumabrite™ also makes the sign face(s) more reflective when the sign is not lighted!

This products inspiration was for the plastic lens industry.

Our people are factory-trained in the application of Lumabrite™.

Dallas Signs Manufacturing adds Lumabrite™ crystal clear coatings to every plastic-faced sign.

OptiGard Flexible Sign Face Protection and a Better Appearance


Flexible sign faces that don’t fade, rot, split, or mildew for 7 years is a step in the right direction, but your sign needs to look nearly as good 20 years from now as it looks the day it is installed; or you need to plan to replace it often so that your potential customers do not get the wrong impression of your business.

The lifetime of flexible sign faces and graphics, as well as their appearance, is extended when protected with a clear, high-gloss, mar-resistant OptiGard™ topcoat which protects plastics from ultraviolet light and ozone so that they last longer, and reduces maintenance because of built-in self-cleaning properties.

Dallas Signs Manufacturing is the only factory-authorized OptiGard™ source in Northeast Texas.

You won’t have dull, dingy, dirty faces like the sign on the right if we manufactured it.

Dallas Signs Manufacturing adds OptiGard™ protection to every flexible-faced sign.

We've applied OptiGard for over 20 years now.  We have NEVER replaced a sign face due to "yellowing."

Protected vs. unprotected (yellowed) flexible sign face material.See the difference between protected and unprotected (yellowed) flexible sign faces?  This test material was left outside for 7 years.

(This product does not come from the traditional sign industry.  Few sign companies know about it, or where to get it.)

SolarGuard and OptiGard Protection


Nothing looks worse than a sign with its lettering peeling off.  To prevent this we overcoat your graphics with clear SolarGuard™ or OptiGard™ solar protection, depending on the material they are adhered to, so that they will last.

Protection Against Vandalism


The unique clear coats Dallas Signs Manufacturing applies over vinyl lettering and graphics are also formulated to remove one remaining objection knowledgeable consumers have to the use of vinyl on sign faces.

We have all seen signs where vandals have peeled-off lettering to make the sign imply something else, or simply to deface them.

When your sign is vandalized it must be replaced so that it effectively represents your business; even if the sign is simply a listing of “Pool Rules.”

While it is probably “technically” possible to remove lettering and deface a sign we manufactured with SolarGuard™, OptiGard and/or Lumabrite™ protection we are not aware of anyone, ever, having done so.

 Pole Sign Pole Sign Pole Sign Pole Sign Pole Sign Pole Sign Pole Sign

Intertek (ETL) Approved ManufacturerUnderwriters Laboratories (UL) Approved ManufacturerSigns Manufacturing™ & Maintenance Corp.

 

FOR ORDERING OR ASSISTANCE CALL:
214-339-2227    254-582-7446    817-861-1234    903-561-5959    940-365-3433    972-850-3300    800-333-7137 TOLL-FREE
Sales Team: Sales@SignsManufacturing.com

FCC Statements:

·        Signs Manufacturing™ does not provide any compensation for testimonials.

·        None of the photographs in our brochures, or on our website, are “photo-shopped.”

Better Business Bureau Sign Company

        Click Here To Automatically Add Our Vcard To Your Contact List      (What Is A Vcard?)     Privacy Policy

 

Copyright © 1979-2018  Sign Marketing Services - ALL RIGHTS RESERVED