Call Now!

(214) 331-2334

Dallas Sign Company

Turn-Key Sign Design, Sign Manufacturing, Sign Installation and Sign Service since 1979.

Now with Live Showroom Demonstrations

Products that Improve Your Signs

Come See Our

$450,000+ SIGN SHOWROOM!

Up | Literature | Contact Us

PinLights LED Cabinet Sign           PinLights     EnergyStar Signs with Logo  

SolarBrite PinLights External L.E.D.

 (Light Emitting Diode) Lighting

 for Monument Sign Faces

A Brighter Future...Using Less Energy™

PinLightsDallas Signs Manufacturing incorporates a patent pending high-tech design into our unique new-look concept.

PinLights™ LED first-surface lighting systems feature SolarBrite™ LEDs that are optically enhanced to appear larger.

Monument signs with color graphics and PinLights™ LED first-surface lighting is a hands-down winner.

No other face-decorated cabinet sign incorporates direct lighting.  And when compared to incandescent lighting or fluorescent back-lighted cabinet signs it is better-looking, cheaper, lasts longer, and uses less energy.

Flex-faced Pole Sign Cabinet with PinLights BorderPinLights™ can even "Twinkle."   Importantly, the individual lights never go "off", they DO NOT "flash."  Many cities ban flashing lights.

The US Small Business Administration (SBA) says that an electronic message center will increase a store's volume 15 to 150%.

The attribute that makes LED Electronic Message Centers so effective is that they use light to attract attention during the day.

This is the only other sign face that can do so.

With LED first-surface lighting, again like electronic message centers, you determine the daytime brightness of your sign by the density, colors, and patterns of lighting you choose.  PinLights™ gives you choices, unlike all other forms of lighting.

Solarbright lighted first-surface sign cabinet.PinLights™ can also comply with many cities bans on flashing lights, which causes electronic message centers to be banned or severely restricted, or they can flash or twinkle (in multiple or varying colors.) 

But at a minimum the decorated sign face is comparable to a traditional back-lighted sign face when not lighted.

In other words, a PinLights™ sign will always look better, and attract more attention, than any cabinet sign ever built previously; can cost about the same to purchase, but use less energy.

Many companies manufacture LED's.  There are over 5,000 varied LED's available, and they vary greatly as to brightness, lux, light-dispersal (viewing) angle, useful lifetime, and lifetime.

Some are very cheap, some are quite expensive.

PinLights Face in AssemblyDallas Signs Manufacturing only uses SolarBrite™ LED's that are rated to retain 80% of their brightness for 60,000+ hours.  These are the most expensive, but highest value, conventional LED's.  Our selection of LED's is what makes our signs brighter, and last longer.

Sign Face with First-surface LEDsAs an example, a White SolarBrite™ LED is 280 lux, compared to our BrighterSigns™ neon's 235 lux, or standard neon's 140 lux.  "Lux" is the candle-power of light shining on a surface.

However, with visible light sources "nits" are more important than "lux."  As explained below, Dallas Signs Manufacturing's SolarBrite™ LEDs are 8,000 to 13,000 nits, depending on color.

A SolarBrite™ LED incorporates a new kind of chip, different from all other LED's.  Dallas Signs Manufacturing is an industry leader in the implementation of new technology in advertising.

SolarBrite™ LED's utilize military specification coatings on the circuit boards the LED's are attached to, preventing corrosion and electrical problems.

Like neon, LED's are also affected by voltage.  For instance, an LED will also burn nearly 100% brighter if you double the power feeding it.  The LED will last about 1/6 as long, however, making this alternative quite expensive in total cost.  We power our SolarBrite™ LED's properly.

 SolarBrite™ PinLights™ LEDs are available in 5 fixed colors (Red, Green, Blue, White and Yellow) or as multi-color infinitely-variable individual lights featuring 65,000,000 colors.PinLights Face in Shop

Unlike virtually every other LED sign currently manufactured, each individual PinLights™ LED is independently serviceable.

And if a single LED does fail all of the other LEDs still light.  Our wiring is in parallel, not in series.

In most instances PinLights™ LED first-surface lighting systems can be retrofitted to existing internally lighted cabinet signs, pole and pylon signs, and Monument signs.

Solar Powered EnergySavingSigns™

Solar EnergyStar Signs Power KitEnergyStar Signs with LogoPinLights™ Cabinet signs can be economically directly solar powered, without even using an energy-robbing inverter, saving you even more!

They are the only major business sign that can.

You are saving much more than just energy, and money.

Energy-Saving EnergySaving™ PinLights™ Signs

PinLights™ consume 0.1 watt per light at 5 volts DC!  One thousand lights left on 8 hours per day for 365 days will use $4.01 in electricity.


PinLights Signs Face - Pepsi   PinLights First-Surface LED Sign Face - Pepsi   PinLights First-surface LED Cabinet Sign 


PinLights at Night PinLights at Night PinLights Sign

"That's beautiful!"

Emily Wright, Chit Chat Restaurant, upon seeing her new sign in our warehouse before installation.

   PinLights sign for Chit Chat during the day   PinLights sign for Chit Chat in production   Amazing effect of this PinLights sign for Chit Chat at night!

Click to Enlarge.

Patent Pending

UL Listed Sign Component

Underwriters Laboratories has evaluated PinLights™ and they have been approved for use in outdoor, damp and wet location signs.

UL Approval #E345252.

Ours are the only approved individual LED first-surface lighting products.

As the manufacturer we are very proud of this.

What are LED's?

A light-emitting diode (LED) is a semiconductor device that emits incoherent monochromatic light when electrically biased in the forward direction. This effect is a form of electroluminescence. The color depends on the semiconducting material used, and can be near-ultraviolet, visible or infrared.

A LED is a special type of semiconductor diode. Like a normal diode, it consists of a chip of semiconducting material impregnated, or doped, with impurities to create a structure called a pn junction. Charge-carriers (electrons and holes) are created by an electric current passing through the junction, and release energy in the form of photons as they recombine. The wavelength of the light, and therefore its color, depends on the band gap energy of the materials forming the pn junction. A normal diode, typically made of silicon or germanium, emits invisible far-infrared light, but the materials used for a LED have band gap energies corresponding to near-infrared, visible or near-ultraviolet light.

Unlike incandescent bulbs, which can operate with either AC or DC, LED's require a DC supply of the correct polarity. When the voltage across the pn junction is in the correct direction, a significant current flows and the device is said to be forward biased. The voltage across the LED in this case is fixed for a given LED and is proportional to the energy of the emitted photons. If the voltage is of the wrong polarity, the device is said to be reverse biased, very little current flows, and no light is emitted.

Conventional LED's are made of inorganic minerals such as:

  • aluminum gallium arsenide (AlGaAs) - red and infrared

  • gallium arsenide/phosphate (GaAsP) - red, orange and yellow

  • gallium nitride (GaN) - green

  • gallium phosphate (GaP) - green

  • zinc selenide (ZnSe) - blue

  • indium gallium nitride (InGaN) - blue

  • silicon carbide (SiC) - blue

  • diamond (C) - ultraviolet

LED development began with infrared and red devices, and technological advances have made possible the production of devices with ever shorter wavelengths.

Blue LED's became available in the late 1990s. They can be added to existing red and green LED's to produce white light. Most "white" LED's in production today use a blue LED chip covered by a scintillate coating made of Zinc solenoid (ZnSe). The LED chip emits blue light, part of which is converted to yellow by the ZnSe. This mixture of blue and yellow light creates the impression of white - hence the bluish or yellowish tint that these diodes usually exhibit.

The most recent innovation in LED technology is a device that can emit ultraviolet light. When ultraviolet light illuminates certain materials, these materials will fluoresce or give off visible light. White light LED's have been produced by building ultraviolet elements inside material that fluoresces to produce white light.

The semiconducting chip is encased in a solid plastic lens, which is much tougher than the glass envelope of a traditional light bulb or tube. The plastic may be colored, but this is only for cosmetic reasons and does not affect the color of the light emitted.

Most typical LED's are designed to operate with no more than 30-60 millewatts of electrical power.  In 2002, 5 watt LED's became available with efficiencies of 18-22 lumens per watt.

SMD (Surface Mounted Device) LED's have been created that combine RGB color sources in one LED.  They allow the display matrix, pitch, to be much closer.  They are very expensive, but more importantly do not have the nits (candela per square meter) for outdoor use.

For outdoor use, you need at least 2,000 nits for daylight use in most situations. (The brightness of LED's can be turned down.)

Dallas Signs Manufacturing's SolarBrite™ LEDs are 8,000 to 13,000 nits, depending on color.

Intertek (ETL) Approved ManufacturerUnderwriters Laboratories (UL) Approved ManufacturerSigns Manufacturing™ & Maintenance Corp.


214-339-2227    254-582-7446    817-861-1234    903-561-5959    940-365-3433    972-850-3300    800-333-7137 TOLL-FREE
Sales Team:

FCC Statements:

·        Signs Manufacturing™ does not provide any compensation for testimonials.

·        None of the photographs in our brochures, or on our website, are “photo-shopped.”

Better Business Bureau Sign Company

        Click Here To Automatically Add Our Vcard To Your Contact List      (What Is A Vcard?)     Privacy Policy


Copyright © 1979-2018  Sign Marketing Services - ALL RIGHTS RESERVED